Sensor Puck - Leak Detection - Temperature & Humidity
Minimalistic sensor housed in vented enclosure (86*86*25mm). Leak detection points on the base of enclosure. Onboard temperature and humidity sensor

Wireless Connectivity up to 1km
Temperature 0 – 50°C
Humidity 0-85% (+/-2%)
Movement
Leak detection
Report rate at 15 mins
Battery Life of up to 2 Years

Requires Gateway*
Requires 1 * batteries (007-AAF-001)

Part code (600-AAX)
0.0 GBP
NanoULTRA-III Lite
RS485 communication with the toolset to quickly set up Modbus communications (one-off configuration charges may apply)
*The NanoULTRA-III can Support for up to 12 Modbus RTU slave devices

Easily manage Modbus templates and map them into new devices at scale.
Seamless cellular communication with the asset cloud platform.
Easily manage Modbus templates and map into new devices at scale
Onboard cellular connectivity.
Onboard memory for continuous storage and transmission of data during any communication interruptions.
Digital and Analogue i/o’s available (we also offer a wide range of expansion modules)
Firmware Over the Air (FOTA) for resilient system deployments.
Powerful, remote diagnostic tools to manage high volumes of remote assets.
Fully roaming and managed SIM platform.
From our asset cloud platform you can configure and manage assets, set alarms and audit trails, integrate and export data, and view trends, visualisations, and analytics.


Part code (050-LAA)
0.0 GBP
NanoULTRA-III Pro
RS232/RS485/TCP communication with the toolset to quickly set up.
Modbus communications (one-off configuration charges may apply)
*The NanoULTRA-III can Support for up to 12 Modbus RTU slave devices
Easily manage Modbus templates and map them into new devices at scale.
Seamless cellular communication with the asset cloud platform.
Simple installation and configuration, achievable at scale with non-technical employees.
Onboard cellular connectivity.
Onboard memory for continuous storage and transmission of data during any communication interruptions.
Digital and Analogue i/o’s available (we also offer a wide range of expansion modules).
Edge-based, interrupt-driven intelligence to capture fast, asset-based events that could be missed with traditional sample-based technology.
Firmware Over the Air (FOTA) for resilient system deployments.
Powerful, remote diagnostic tools to manage high volumes of remote assets.
GPS location and tracking capabilities.
Fully roaming and managed SIM platform.
From our asset cloud platform you can configure and manage assets, set alarms, view audit trails, integrate and export data, view trends, visualise data and integrate 3rd party analytics.

Investing in the NanoULTRA - III Pro and the Polygon Digital Solutions Platform gives you access to a fully integrated end-to-end IoT solution to effectively manage your assets.

Part code (050-PAA)
0.0 GBP
Outdoor Cellular Gateway
LoRaWAN Outdoor Gateway

Wireless LoraWAN outdoor gateway for extended coverage performance.

IP67 Rated

(For accessories please contact digital solutions for available options)

Part code (040-CAJ)

0.0 GBP
Humidity & Temperature Sensor for MultiSensor
1m Cable (10mm Diameter). In-depth temperature/humidity sensor. -20 to 70 Degrees C, 0-100% RH. IP67.

Ideal for taking measurements within concrete screeds and building materials
Connects into the main sensor via the jack plug

Part code (003-ADR-JACK)


0.0 GBP
Batteries
AA Lithium Battery 3.6V 2.6Ah




Part code (007-AAF-001)
0.0 GBP
HygroBug for MultiSensor - WME
Highly consistent moisture content readings in highly saturated building materials.
Highly responsive
Un-affected by conductive and contaminated materials
Provides feedback even when using high levels of heat to dry (which is not possible with an in-depth RH probe)
Great for target drying regimes

Part code (002-AAC-002)
0.0 GBP
Leak Rope for MultiSensor - 5m
Leak Detection sensor cable, 5m long

Part code (002-AAG-001)
0.0 GBP
Slim Temperature & Humidity Probe for MultiSensor
SHT21 - Slim Probe 5m cable (5mm Diameter), T/RH assemblies complete with 5m cable with Jack plug and probe cover.

Operating Temperature -40°C ~ 80°C
Humidity Range 0 ~ 100% RH

Part code (003-AFA-001)
0.0 GBP
WME Moisture Content Crimps for MultiSensor
Perfect for sensitive wooden floors and wooden structures.
Moisture content cables with ring crimp connectors. Use regular self-tapping screws to fix ring crimps to building material.
Distance needs to be 25mm apart

Part code (002-AAB-002)

0.0 GBP
Indoor Gateway - 4G and Ethernet
LoRaWAN Indoor Gateway 4G Cellular and Ethernet

Supplied with DC adapter
Onboard cellular connectivity
Provides a link to platform for up to 1000 sensors
Internal antenna

Part code (040-AAG)
0.0 GBP
MultiSensor - Environmental
Ambient temperature -10 to +60°C
Ambient RH 0 to 100%
In-depth temperature and RH (Option)
WME moisture content. 8% - 100% (Option)
Report rate at 15 mins
Battery Life of up 2 Years


Options
In-depth temperature and RH (040-AAB-001)
WME moisture content (002-AAB-002)
Slim probe cable (003-AFA-001)
Leak rope (002-AAH-001)
HygroBug (002-AAC-002)

Requires 1 * batteries (007-AAF-001)

Part code (NUL-SEN)
0.0 GBP
Minimalistic Sensor - Temperature & Humidity
CO2 range 0-5000ppm (+/-3ppm accuracy)
Small form factor 21*74*21mm
Temperature 0 – 40°C
Humidity 0-100% (+/-2%)
Tilt
Vibration
Leak detection
Report rates from 2-60 minutes (Typical 15 mins)
Battery Life of 2 Years


Requires 1 * batteries (007-AAF-001)

Part code (003-ADA)
0.0 GBP
MultiSensor - Environmental - Industrialised
Ambient temperature -10 to +60°C
Ambient RH 0 to 100%
In depth temperature and RH (Option)
WME moisture content (Option)
Industrial housing
Report rates from 2-60 minutes (Typical 15 mins)
Battery Life of 2 Years

Options
WME moisture content (002-AAB-002)
Slim probe, 10m cable (003-AFA-001)
Leak rope, 10m (002-AAH-001)
HygroBug

Requires 1 * batteries (007-AAF-001)

Part code (NUL-SEN-IND)

0.0 GBP
IAQ+ Sensor - CO2 - Industrialised
CO2 range 0-5000ppm (+/-3ppm accuracy)
VOC’s. IAQ index 0-500
Temperature -10 – 60°C
Humidity 0-100% (+/-2%)
Dust PM1, 2.5, 4, 10
Pressure Range (with full accuracy): 300 – 1100hPa
Report rates from 2-60 minutes (Typical 15 mins)
Ruggedised industrial enclosure
Battery Life of 2 Years

​Requires 4 * batteries (007-AAF-001)

Part code (ADZ-001-IND)
0.0 GBP
IAQ+ Sensor - CO2
CO2 range 0-5000ppm (+/-3ppm accuracy)
VOC’s. IAQ index 0-500
Temperature -10 – 60°C
Relative Humidity 0-100% (+/-2%)
Dust PM1, 2.5, 4, 10
Sound
Barometric Pressure (with full accuracy): 300 – 1100hPa
Report rates from 2-60 minutes (Typical 15 mins)
Option is available to fit one gas module

Battery powered wireless sensor - Requires 4 * batteries (007-AAF-001)
Battery Life of 2 Years

Part code (003-ADZ)
0.0 GBP
IAQ Zone Sensor - CO2- Industrialised
CO2 range 0-5000ppm (+/-3ppm accuracy)
VOC’s. IAQ index 0-500
Temperature -10 – 60°C
Humidity 0-100% (+/-2%)
Report rates from 2-60 minutes (Typical 15 mins)
Ruggedised industrial enclosure
Battery Life of 2 Years

Requires 4 * batteries (007-AAF-001)

Part code (ADO-001-IND)
0.0 GBP
NanoULTRA-III Elite - Gateway
RS485 communication with the toolset to quickly set up Modbus communications (one-off configuration charges apply – see price list)
*The NanoULTRA-III can Support for up to 12 Modbus RTU slave devices.

Onboard Wi-Fi and Ethernet connectivity.
Digital and Analogue i/o’s available (we also offer a wide range of expansion modules)
Worldwide accreditations offering a truly global, enterprise-grade solution.
GPS location and tracking capabilities.
Integrated SD card storage for mass storage of granular data sets.

Part Code (050-EAA)
Firmware Over The Air (FOTA) for agile innovation and system management 8.
0.0 GBP
IAQ Zone Sensor - CO2
CO2 range 0-5000ppm (+/-3ppm accuracy)
VOC’s. IAQ index 0-500
Temperature -10 – 60°C
Humidity 0-100% (+/-2%)
Pressure Range (with full accuracy): 300 – 1100hPa
Report rates from 2-60 minutes (Typical 15 mins)
Battery Life of 2 Years

Requires 4 * batteries (007-AAF-001)

Part code (003-ADO)
0.0 GBP